We plan, engineer, and execute partial demolition across Sydney. Selective wall removal, section demolition, and structural modifications. Controlled precision, not a wrecking ball.
Partial demolition is harder than knocking everything down. You're removing specific elements while keeping the rest of the building standing, safe, and undamaged. Load-bearing walls, shared party walls, upper floors above, and live services all need to be considered before a single hit is taken.
METCON coordinates partial demolition with structural engineers. We assess what's load-bearing, design temporary support, plan the demolition sequence, and execute with precision. The structure you're keeping stays safe throughout.
Whether it's removing a wall for an open-plan layout, taking out a section of building for an extension, or demolishing one part of a structure while the rest stays occupied, we plan the engineering first, then execute the demolition.
If any of these sound familiar, it is worth a free site visit. We will tell you straight what your site needs.
Load-bearing walls support the structure above. Removal requires engineering design, temporary propping, and a new beam or lintel.
When extending a building, part of the existing structure often needs to come out to connect old to new properly.
Party wall modifications have specific legal and structural requirements. Engineering and neighbour coordination needed.
Removing ground-floor elements while the upper level stays requires careful propping and load-path management.
Partial demolition in occupied buildings needs vibration control, dust management, and structural monitoring.
Heritage buildings need careful, selective demolition that preserves significant fabric while removing what's no longer needed.
Need to remove part of a building? Send us photos and we'll advise on the engineering and demolition approach.
From single wall removal to multi-section demolition, we handle every type of partial demolition with engineering precision.
Structural assessment, temporary propping design, demolition, and new beam or lintel installation. The structure above stays safe and supported throughout.
Removing defined sections of a building, rooms, wings, levels, or portions, while maintaining the structural integrity of everything that remains.
Taking off an upper level or partial storey while maintaining the structural stability of the lower levels. Roof, framing, and services stripped in sequence.
Partial foundation removal, undercutting, and modification for basement extensions, lowered floor levels, or service installations.
Design and installation of temporary propping, shoring, and bracing to maintain structural stability during demolition and modification works.
Precision concrete cutting, core drilling, and steel cutting for controlled openings, penetrations, and selective removal without vibration damage.
A selection of recent partial demolition projects across Sydney.
View all projects
Every partial demolition follows our structured five-step process. The engineering comes first, the demolition follows the plan exactly.
We inspect the structure, identify load paths, locate services, and determine what's load-bearing versus non-structural. This drives every decision that follows.
Structural engineer designs the demolition sequence, temporary support, and permanent modifications. Nothing is removed without an engineered plan.
Safety plan, dust and vibration management, neighbour notifications, and construction staging developed. Permits and approvals obtained.
Demolition executed per the engineer's sequence. Temporary supports installed before removal, structural elements protected, and work documented at hold points.
New beams, lintels, or connections installed as designed. Temporary supports removed per engineer's instruction. Structure certified safe and stable.
Structural engineering, demolition documentation, photographic records, and engineer certification. Everything needed for the next stage of your project.
Partial demolition is where building knowledge matters most. We understand structures, how they carry load, where the critical paths are, and how to safely modify them.
Every partial demolition is coordinated with a structural engineer. The plan comes before the hammer.
We build structures as well as demolish them, we understand both sides of the equation.
Meteora Constructions Pty Ltd, fully licensed in NSW with all required insurances.
We design and install temporary support systems to maintain stability during demolition.
We execute partial demolition in occupied buildings with proper vibration, dust, and noise management.
Hands-on Sydney building experience going back to the 1970s.
Real reviews from homeowners, strata and builders.
We're a strata block and needed a retaining wall replaced urgently. METCON moved fast, communicated well, and the residents are very happy.
I called three builders and METCON were the only ones who actually came to look at the site before quoting. Honest pricing, no surprises.
We got three quotes. METCON was not the cheapest but was clearly the most thorough. Worth every dollar.
Straight answers from the builder. Anything else, just ask.
Yes, most demolition work in NSW requires approval. Internal strip-outs may be exempt in some cases, but partial and full demolition typically require a Development Application or Complying Development Certificate.
Additional requirements may include:
We handle all permits and compliance requirements.
We coordinate licensed asbestos removal as part of our demolition and renovation services. All asbestos work is carried out by licensed removalists in line with SafeWork NSW regulations.
If your property was built before 1990, there is a chance it contains asbestos, so we always arrange appropriate testing before starting demolition or renovation work.
Every METCON quote is fully itemised and includes:
There are no hidden costs. What we quote is what you pay, unless you request changes to the scope.
Construction can sometimes uncover unexpected issues, especially on older properties or difficult sites.
If we find something outside the original scope, such as hidden asbestos, unstable soil or structural defects, we tell you immediately, explain the options and give you a clear cost for any additional work before proceeding.
You are never hit with surprise bills.
We cover the full scope of demolition & excavation work with one licensed team.
Back to Demolition & ExcavationPlain-language guides from our team on the questions we are asked most.
We deliver partial demolition across Sydney, from inner-city terraces to commercial buildings and industrial facilities.
Photos of what you want removed, existing plans if you have them, and a note on the broader project context. We'll assess the structural implications and come back with an approach and price.
